Paparazzi: Free / Open Source Autopilot Project 
Friday, May 18, 2007, 01:49 AM - Flying Contraptions
Paparazzi is an open source hardware/software project whose goal is to provide a complete autopilot system for UAVs.

The Paparazzi project is hosted at the "Ecole Nationale de l'Aviation Civile" (ENAC) in France, and is the basis of ENAC's autonomous UAV project.

The hardware is built around a Philips LPC2148 ARM-7 chip. It includes a GPS and Pyro-electric infrared sensors for pitch and roll angle detection (no gyros).


2 comments ( 233 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 2557 )

Crespiere 2007 
Friday, May 18, 2007, 01:25 AM - Flying Contraptions
Crespiere 2007, an annual get-together of electric R/C airplanes in France, took place last week. I'm told the weather was sub-optimal (very high winds), and the turn out less than usual (because of the weather). Web magazine RC Pilot Online has a picture gallery of the event.

I was intrigued by this weird-looking plane that looks like a Calder scultpure.

There is also a picture of my dad's new CAP-10 . Unfortunately, bad weather prevented test flights before Crespiere, hence it didn't fly during the event.


1 comment ( 135 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 2.9 / 5698 )

Nice Electric UAV video from Trek Aerospace 
Tuesday, April 3, 2007, 01:26 AM - Flying Contraptions
Trek Aerospace has demonstrated a small, electric powered UAV called the OVIWUN. It has two contra-rotating ducted fans on each side of a "fuselage". The ducted fans can be independently tilted forward or backward to control yaw and pitch (as well as forward/backward translation). Roll is apparently controlled by changing the relative speed of the rotors. Each rotor is powered by a 450 Watt electric motor. The UAV is 36cm tall, 65cm wide, 41cm long, and weighs 2520 grams (with batteries). They claim an endurance of 20 minutes, and maximum speed of 75km/h (which I find very hard to believe).

The $15,000 price is a bit steep for something many of us could probably build in our shop. However, the good news is that UAV is controlled by an Xscale-based single-board computer running Debian Linux, and comes with open source flight control software.

There is a nice video of the OVIWUN's indoors test flights

2 comments ( 118 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 2.9 / 260 )

Tech reports on the 2006 UAV competition 
Monday, March 19, 2007, 01:00 AM - Flying Contraptions
This page has a collection of papers by the participants of the 2006 student competition of Unmanned Air Vehicles. There is quite a lot of details about the hardware used in each of the participants' planes.
1 comment ( 10 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 2525 )

Wowwee's R/C Dragonfly 
Sunday, March 18, 2007, 11:28 PM - Flying Contraptions
My friend Jeff Han recently went to the TED Conference and brought back one of Wowwee's new Flytech R/C Dragonflies. I tried it out and took a few close-up pictures.

The dragonfly flies quite nicely. Its control system is somewhat unique: it has a small propeller on the tail (spun by a pager motor) to pull the tail to the left or to the right. It has a "beginner" mode and an "expert" mode. In beginner mode, the Dragonfly turns rather sluggishly, but in expert mode, it is quite maneuverable. However, it loses a lot of altitude in tight turns, so flying in cramped spaces takes a little bit of practice.

There are 4 wings, but they actually are rigidly attached in pairs. The pairs oscillate in opposite phase as shown on this picture.

The LiPo battery is recharged in 25 minutes (probably not to full capacity) by plugging the Dragonfly into the transmitter. A magnet hods it still on the transmitter.




More pictures are available here.

The Dragonfly is available from Radio Shack for $50.00

UPDATE: Doug Setzer points us his DragonFly forum, and to this photo series that shows the innards of a dissected DragonFly.

1 comment ( 49 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 2.9 / 267 )

Reflex Helicopter from SpinMaster/AirHogs 
Thursday, March 8, 2007, 10:46 PM - Flying Contraptions
SpinMaster came out with the Reflex R/C Helicopter. Like many recent toy R/C helicopters, the reflex has two contra-rotating rotors for stability. The new twist is that it has two "thrust" motors and prop (one on each side of the body) to make it move forward, backward, and to rotate. They claim an un-precendented maneuverability, which I can believe. It has to be easier to control than the Picoo-Z and AirHogs's own Havoc.

The price is $70.


4 comments ( 258 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 5384 )

More R/C sensors from EagleTree 
Saturday, March 3, 2007, 05:50 PM - Flying Contraptions
EagleTree Systems just rolled out a bunch of new sensors for their MicroPower E-Logger system. The E-Logger can record a number of quantities in a flying airplane, such as motor current, RPM, battery voltage and temperature, etc. The new sensors include: altitude (with better than 1 meter resolution), airspeed, and servo current.

1 comment ( 80 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3.1 / 6206 )

Servo-Free control in cheap R/C plane 
Sunday, February 11, 2007, 07:28 PM - Flying Contraptions
In the last couple of years, a deluge of ultra-low-cost ready-to-flay R/C plane seems to have engulfed toy retailers. Because servos are the most expensive part of R/C planes, most cheap planes have multiple motors and use differential speed control to control turns.

The Air Panther, available at R/C Trading Post uses a different idea: a small propeller inside the vertical fin. I remember reading about this idea many years ago in the "Cloud 9" column in the now defunct magazine R/C MicroFlight. Now, you can buy a ready-to-fly plane for 35 bucks that uses it.


1 comment ( 71 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 5304 )

Micro Turbines operational in 6 months? 
Sunday, February 4, 2007, 09:54 PM - Flying Contraptions
The Future of Things has a story about MIT's micro turbine project. The goal of the project is to produce turbines that are a few mm in size using the same technology used to produce integrated circuits.

Prof Alan Epstein, who has been leading this research for about 10 years, expects an energy density of 500-700 Watt.hour/kg in the near term, and 1200-1500 W.h/kg in the longer term. This includes the turbine and the fuel supply. The energy density for current Li-ion batteries is about 120-150 Watt-hours/kg.

He says commercial versions producing 10 to 50 Watts could appear in 3 to 5 years.

2 comments ( 109 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 2.9 / 5490 )

Air Midi Micro: Micro RC Equipment 
Sunday, February 4, 2007, 09:54 PM - Flying Contraptions
Air Midi Micros sells Micro R/C equipment from Slovakian manufactrurer Microinvent. They have Gasparin/Potensky motors, including geared pager motors, 4g outrunner brushless motors, magnetic actuators, brushless ESC, and receivers. Not cheap, but worth a look.



1 comment ( 120 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 5751 )

Super Cheap RTF R/C Drenalyn 
Tuesday, January 30, 2007, 06:23 PM - Flying Contraptions
The Drenalyn is a popular indoor R/C design in France (I built many such planes myself, see here, here, and here).

It was only a matter of time before a Chinese toy company would produce a low-cost ready-to-fly version. I actually approached the Air Hogs people a few years ago with the PMAV concept, but they were not interested.

Chinese R/C toy company Hongxin Toys is selling a Drenalyn-like R/C toy, which they call a "Kite Airplane". The widget is available in the US from Geeks.com at the incredibly low price of 70 bucks (complete, with transmitter, battery, and on-board LEDs for night flying!).

Most low-cost R/C toy planes are boring 1 or 2-axes types (without ailerons), but this one has elevons, and is probably fully aerobatic.



1 comment ( 141 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 5290 )

Francis Plessier: Pioneer of Unusual Miniature Flying Contraptions 
Tuesday, January 30, 2007, 05:57 PM - Flying Contraptions
You probably figured out by now that we are fond of flying pancakes at Yann's Techno Toys. R/C plane builders have long built fun planes with low aspect ratio or circular wings. The first example I ever saw was Plessier's "Soucoupe", a circular wing built by legendary French modeler Francis Plessier in the mid 1970's. Plessier flew a Soucoupe (with a smiley face painted on the bottom side) at the annual Cirque des Cigognes in Bretigny. I built my first Soucoupe in 1975, right after seeing his. Francis Plessier always came up with crazy ideas for the "Cirque", such as a flying dog house (below), a flying iron (below), flying lawnmower, and many others. His ideas have been ripped
off (often without proper credit) by airplane kit companies in the US.

Pictures of Plessier's Soucoupe, Iron, and Dog House are available at this page.



2 comments ( 225 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3.1 / 236 )

Electric Helicopter Beginner's Guide 
Saturday, January 20, 2007, 02:46 PM - Flying Contraptions
This UK site has an excellent tutorial on electric helicopters by Toshiyasu Morita. The tutorial is available in English and French.

1 comment ( 147 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 248 )

Excellent Article Series on DIY Brushless Motors 
Friday, January 19, 2007, 07:08 PM - Flying Contraptions
There is an excellent series of tutorial articles on the design and performance of brushless outrunner motors at site of the Southern Soaring Club. The articles give all kinds of details on how to morph CD-ROM and hard-drive motors into airplane motors (click on "articles from Southeasters, and look for the article series by Brian Mulder).


1 comment ( 17 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 260 )

Reasonnably Competent Pilot flying an SU-30 
Tuesday, January 16, 2007, 11:36 PM - Flying Contraptions
My friend Steve Crandall pointed me to this video of a Sukhoi 30 being flown by (according to Steve) a "reasonably competent pilot". I didn't realize they could put those SU-30 in reverse.



UPDATE: IraqiGeek tells us this is actually an SU-35, and points us to another nice SU-35 video http://www.youtube.com/watch?v=JY8Yv8AM-p8]here[/url].


1 comment ( 34 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 5309 )

Rubber Toughened CA glue R0ckz 
Tuesday, January 16, 2007, 10:42 PM - Flying Contraptions
I have become very fond of a new type of high-viscosity cyanoacrylate glue that contains what the manufacturer calls rubber (not sure it is rubber). It bonds in 15-30 seconds, has ultra gap filling capabilities, and works very well with carbon fiber, and extruded polystyrene (Depron and such).

One is the Flash Black Rubber-Toughened CA made by NHP ($5.75 at BP Hobbies), another one is the IC-2000 made by BSI Adhesives. They are both foam friendly and respond to foam-friendly accelerator.



1 comment ( 33 views )   |  0 trackbacks   |  permalink   |  related link   |   ( 3 / 234 )


Back Next